actual project site

 | Shincci  Global

Drying Technology

 | Shincci  Global Drying Technology

Printing&Dyeing Sludge
Printing&Dyeing Sludge

Sludge Characteristics:
Textile printing and dyeing sludge in Xinlong WWTP, which contains a lot of textile fiber fluff, has been tested that the volatile content of textile printing and dyeing sludge is relatively high (about 40%) when the moisture content is changed from 40% to 30%. To prevent explosions during the drying process, a low-temperature dehumidification drying technology with a drying temperature not higher than 90°C is adopted.

Electroplating sludge
Electroplating sludge
Electroplating sludge mainly comes from the solid waste generated by various electroplating waste liquids and electrolytic bath liquids of industrial electroplating plants after liquid phase chemical treatment. Due to the different production processes and treatment processes of electroplating manufacturers, the chemical composition of electroplating sludge is quite complex, mainly containing chromium, iron, nickel, copper, zinc and other heavy metal compounds and soluble salts.

Appreciate if you may continue to submit following chart so that we can offer accurate
investment cycle for your reference



Sludge Type:
Dewatering Type:
DS Rate--for liquid sludge inlet to dewatering machine (Only needed when we are expected to offer dewatering machine):%
Inlet sludge: Tonne(s)/Day
Inlet moisture: %
Outlet moisture: %
Working hours:Hour(s)/Day